6. Configuration of the Extension

Tools

Clicking the Tools button in Bridge will reveal all the configuration menus available in Bridge:

Tools menu

Tools menu

Options

Publishing

Tab publishing

Tab publishing

GS SLD Extensions

By default the SLD created is optimized to use GeoServer SLD extensions. If you want to use the SLD in an application where these extensions are not supported, uncheck this option.

Map Esri® default markers

By default a subset of symbols from the Esri® Default Marker font are mapped to symbols in Webdings, Wingdings and Wingdings2 since Esri® fonts are not standard available in the server where the layers are published. (See ESRI Symbol Mapping for a list of symbols). If you want to use the original font symbols, uncheck this option. The font used in the symbology needs to be installed on the server, otherwise this could result in rendering issues of the published layers. The font mapping is only applied to styles published in GeoServer.

Default projection

When publishing a layer without projection information, the default coordinate reference system is used.

Metadata

Tab metadata

Tab metadata

Default values

Set the default contact, license and language for metadata. The default values will be used when Bridge publishes layers that have no values defined for these metadata fields.

Publish references to local resources

Select this checkbox to publish the local resource references in the metadata to the catalogue server.

Invalid metadata policy

Rule to determine what happens when the metadata is not valid according to the selected metadata schema and schematron in the selected server connection in the catalogue server dropdown. When no catalogue server is selected Bridge uses the default metadata profile (ISO19115/ISO19139).

Options:

  1. Allow publication data and metadata
  2. Deny publication metadata
  3. Deny publication data and metadata

When publishing from the ArcMap user interface, Bridge will skip the layers with invalid metadata only, if the “Invalid metadata policy” is set to deny. Layers with valid metadata in the MXD will be published.

When publishing from the CLI Bridge will skip publication of all layers when a layer is found with invalid metadata, is the “Invalid metadata policy” is set to deny.

Proxy

Tab proxy

Tab proxy

Configure a proxy server if you want to use a proxy server that is different from the system proxy server.

Updates

Tab updates & support

Tab updates & support

Updates

Check for updates

Click the button Check to check if there is a new version available. See Application Update.

Automatic update check

By default enabled, disable to turn off automatic update checks.

Support

Log file

Open the GeoCat Bridge log file in your default text editor.

Verbose logging

Enabled by default. When this setting is enabled more detailed messages will be logged in the logfile. Enable this option if you experience errors in Bridge. You will need to restart ArcMap to apply the changes.

Contacts

Manage metadata contacts. These contacts are saved in the Bridge configuration file database. Contacts are used in the dataset metadata and service metadata. Think of the metadata and data contact in a metadata record on a dataset. When Bridge encounters a unknown contact in a metadata record, the new contact is added to the Bridge list of contacts

Contact form

Contact form

Data licenses

Manage data license. Data licenses are used in dataset metadata to indicate under what conditions the dataset can be used. By default a number of open data licenses have been added to Bridge.

Note

Please ensure that you add your own data licenses through this panel. GeoCat does not take any responsibility or liability for erroneous use of data licenses.

Data license form

Data license form

Configuration file

Bridge uses an XML configuration to configure options that are configurable through the user-interface. The configuration file is located in the LocalApplicationData directory of each user: C:\Users\<USER>\AppData\Local\GeoCat\Bridge 3\bridge.config. Removing the bridge.config file from the LocalApplicationData directory will return the configuration to the default settings.

AddDownloadLinksMetadata

When a value is specified Bridge will add the a download link with the format of the value to the metadata. Bridge checks if the download link with that format is available on the server. Setting only works for publishing to GeoServer.

Key GeoServer format
CSV csv
GML2 text/xml; subtype=gml/2.1.2
GML3.1 gml3
GML3.2 application/gml+xml; version=3.2
GeoJSON json
KML application/vnd.google-earth.kml+xml
Shapefile SHAPE-ZIP
geopackage geopackage
geotiff image/tiff
FileGDB ESRI-FileGDB

Allowed values:

  • Comma separated list of formats, allowed values in list: CSV, GML2, GML3.1, GML3.2, GeoJSON, KML, Shapefile, geopackage, FileGDB

Default value:

<add key="AddDownloadLinksMetadata" value=""/>

BasicAuthenticationGeoServer

Set Bridge to use basic authentication to connect to GeoServer. By default Bridge uses form authentication with a JSESSIONID cookie.

Allowed values:

  • True
  • False

Default value:

<add key="BasicAuthenticationGeoServer" value="False"/>

CopyFontsMapServer

Copy fonts of symbology to MapServer on publication. Be aware that you need to have a valid license to use some proprietary fonts on your MapServer. For instance it is not allowed to use ESRI fonts on a server that is not running any licensed ESRI products.

When using an ftp service to copy the fonts to your server you will need to either:

  • create an alias named _bridge_fonts_ in the home folder of the ftp user that points to the MapServer fonts folder (FileZilla Server on Windows)
  • create a directory named _bridge_fonts_ in the home folder of the ftp user and mount the MapServer fonts folder on it like this:

Creating a directory named _bridge_fonts_ is not required when copying the files to the local filesystem.

mkdir /mapserver/projects/_bridge_fonts_
mount --bind /mapserver/fonts /mapserver/projects/_bridge_fonts_

When copying of the files fails, no error message is displayed in the publish report afterwards, this will be improved in a later version. Check the log file for error messages on copying the fonts.

Allowed values:

  • True
  • False

Default value:

<add key="CopyFontsMapServer" value="False"/>

CustomDownloadProtocols

Set specific protocol string for format specific download links in the metadata, see AddDownloadLinksMetadata. Comma separated list of key value pair. Key and value should be separated by %. The key GML sets the download format for all GML formats (GML2,GML3.1,GML3.2). Data format needs to be supported by GeoServer in order for Bridge to create download link in the metadata.

Allowed keys: CSV, GML, GML2, GML3.1, GML3.2, GeoJSON, KML, Shapefile, geopackage, geotiff, FileGDB.

Example usage:

<add key="CustomDownloadProtocols" value="GeoJSON%JSON,KML%OGC:KML"/>

Default value:

<add key="CustomDownloadProtocols" value=""/>

DisableUpdater

Disable automatic checking for updates

Allowed values:

  • True
  • False

Default value:

<add key="DisableUpdater" value="False"/>

Expect100Continue

Adds HTTP header Expect: 100-Continue to all HTTP requests

Allowed values:

  • True
  • False

Default value:

<add key="Expect100Continue" value="True"/>

FileRasterByReference

Publish raster data by reference to GeoServer. Prevents uploading raster files to GeoServer, requires the raster files to be accessible from both ArcMap and GeoServer. When this option is enabled and additional configuration option “Map path” is shown in the GeoServer configuration panel. Supported file formats are GeoTiff,WorldImage, ECW and ImageMosaic.

Publish rasters by reference

Publish rasters by reference.

The map path option allows to configure a mapping between from the local path to the remote path. For instance when the raster data is available for ArcMap in D:\rasters and for GeoServer in Z:\rasters the value for local path is D:\ and the value for remote path is Z:\.

Allowed values:

  • True
  • False

Default value:

<add key="FileRasterByReference" value="False"/>

FileVectorByReference

Publish shapefiles by reference to GeoServer. Prevents uploading vector files to GeoServer, requires the shapefiles to be accessible from both ArcMap and GeoServer. When this option is enabled and additional configuration option “Map path” is shown in the GeoServer configuration panel. See the FileRasterByReference option for a screenshot. Shapefile only, so does not work for any geodatabase (FGDB, PGDB, etc.)

The map path option allows to configure a mapping between from the local path to the remote path. For instance when the vector data is available for ArcMap in D:\vectors and for GeoServer in Z:\vectors the value for local path is D:\ and the value for remote path is Z:\.

Allowed values:

  • True
  • False

Default value:

<add key="FileVectorByReference" value="False"/>

ForceShapefile

Use Shapefile format even if the GeoPackage extension is installed in GeoServer.

Allowed values:

  • True
  • False

Default value:

<add key="ForceShapefile" value="False"/>

GeonetworkEcasAuthentication

Enable the option for ECAS authentication for GeoNetwork server connections.

Allowed values:

  • True
  • False

Default value:

<add key="GeonetworkEcasAuthentication" value="False"/>

HTTPUserAgent

Sets a user-agent string for all HTTP requests. Default value is an empty string. In case you need to specify a user-agent a recommended value is geocat-bridge.

Allowed values:

  • Any string made out of the following character set [a-zA-Z0-9]

Default value:

<add key="HTTPUserAgent" value=""/>

KeepExistingDistOnPublication

On publication of metadata to catalogue keep all online resources referenced in the metadata. When set to False Bridge will remove all the online resources referenced in the metadata and only add the online resources for the current publication.

Allowed values:

  • True
  • False

Default value:

<add key="KeepExistingDistOnPublication" value="False"/>

LayerGroupMode

Default mode for layer groups created in GeoServer, valid values are CONTAINER, SINGLE and NAMED.

Allowed values:

  • CONTAINER
  • SINGLE
  • NAMED

Default value:

<add key="LayerGroupMode" value="CONTAINER"/>

LowerCasePostGIS

When set to true Bridge will create lower case tables in PostGIS with lowercase column names and create layers with lowercase layernames in OWS services in GeoServer. Recommended to set to True, default value is set to False for backwards compatibility.

Allowed values:

  • True
  • False

Default value:

<add key="LowerCasePostGIS" value="False"/>

MapfileMAXSIZE

Set MAXSIZE for MapServer mapfile, when set to 0 Bridge will not specify MAXSIZE. In that case MapServer uses the default as MAXSIZE (2048px).

Allowed values:

  • Any positive integer value

Default value:

<add key="MapfileMAXSIZE" value="2048"/>

MarginExtent

Sets a margin on the bounding box of the Mapfile or the bounding box of the layer (GeoServer). Value is a percentage of the layer or map extent.

Allowed values:

  • Any positive decimal value

Default value:

<add key="MarginExtent" value="0.05"/>

MetadataTitleAsOWSTitle

Use the metadata title of the layer in GeoServer/MapServer as layer title, instead of using the TOC layername

Allowed values:

  • True
  • False

Default value:

<add key="MetadataTitleAsOWSTitle" value="False"/>

OwsAccessConstraints

Set default value for access constraints in OWS capabilities document (GeoServer only), when empty Bridge will not configure this value for new workspaces and therefore the value from /rest/services/wms/settings.xml will configure this value.

Allowed values:

  • Any string

Default value:

<add key="OwsAccessConstraints" value=""/>

OwsFees

Set default value for fees in OWS capabilities document (GeoServer only), when empty Bridge will not configure this value for new workspaces and therefore the value from /rest/services/wms/settings.xml will configure this value.

Allowed values:

  • Any string

Default value:

<add key="OwsFees" value=""/>

ReverseWMSLayers

Reverse layers in WMS service workspace/mapfile. By default Bridge organises the layers in the WMS based on drawing order. So the top layer (in your ArcMap map project) will be the last layer in the WMS capabilities document. If you want the top layer (in your ArcMap map project) to be the first layer in the WMS capabilities document, set the ReverseWMSLayers configuration option to True.

Allowed values:

  • True
  • False
<add key="ReverseWMSLayers" value="False"/>

SymbolSizeFactor

Multiply symbol size for MapServer mapfile with this factor

Allowed values:

  • Any decimal value (decimal separator “.”)

Default value:

<add key="SymbolSizeFactor" value="1.0"/>

TimeOutCapabilitiesRequest

Set timeout for capabilities requests to OGC Web Services. Value is timeout in milliseconds, default value of 15000 is equal to 15 seconds.

Allowed values:

  • Any valid 32-bit signed integer value bigger or equal to zero

Default value:

<add key="TimeOutCapabilitiesRequest" value="15000"/>

Administrator configuration

The configuration and the server connections of Bridge are saved in a SQLite database in the local application data folder called bridge_config.db. The local application data folder can be found under (substitute the <USER> with the actual user name): C:\Users\<USER>\AppData\Local\GeoCat\Bridge 3.

This file can be used as a configuration file for deploying Bridge on a large number of machines. Simply configure Bridge on one machine and retrieve bridge_config.db and use this file to configure other installations.

A template configuration database can be found in the Bridge installation folder. The Bridge installation folder is typically located in C:\Program Files\GeoCat\Bridge 3 (32 bits OS) or C:\Program Files (x86)\GeoCat\Bridge 3 (64 bits OS). The empty database can be used to reset the existing configuration, by replacing the file in the local application data folder with the one from the installation folder.

Administrator configuration bridge.config

As a administrator one can configure the default values in the bridge.config file for all users. Do this by creating a copy of the bridge.config.template file in the installation directory and naming the copy bridge.config.

When the bridge.config file is present in the installation directory, Bridge will copy this configuration file to the Bridge LocalApplicationData directory on first startup.

Password Encryption

Note that the passwords for all the server configurations are encrypted inside the GeoCat Bridge configuration database.

License information

The configuration database also saves the license configuration. In case the other machines will not share the same license as the machine you are copying the configuration database from, you will need to edit the configuration database to remove the license information. A good SQLite client with a GUI for this is SQLiteBrowser.

The license information is located in the table “LicenseDetails”. If you want to remove the License Key from the table, just replace the current value with an empty string.